On Sale 10MPa Gas Pressure Sintering Furnace

Gas pressure sintering means that the sintering process is carried out at low pressure first, then the material is sintered under normal pressure and finally sintered at high pressure (the result is to further increase the fatigue state of the material and quickly eliminate the stress in the material), After the high temperature and high-pressure sintering process, the mechanical properties (hardness, strength, toughness, etc.) of the materials are better than those of the ordinary sintering process.

Invest in the future of sintering technology with our 10MPa Gas Pressure Sintering Furnace. Elevate your production capabilities, optimize material properties, and gain a competitive edge in your industry. Experience the synergy of precision engineering and innovation – experience unmatched results with our top-tier sintering furnace.

Inquire Now

Technical Data

HAOYUE HIP furnace series is designed to integrate the functions of pressure de-waxing, vacuum de-waxing, vacuum sintering, partial pressure sintering, pressure sintering, atmosphere sintering, cooling and etc.

To meet various working process requirements, process gases like Ar, H2, CH4 and N2 could be used to control the chamber atmosphere under different pressure and temperature.

Horizontal design for easy loading, unloading and maintenance. Automatic control during the whole process.

With robust construction and precision engineering, our 10MPa Gas Pressure Sintering Furnace offers unparalleled control over sintering processes. The ability to operate under high gas pressure conditions up to 10MPa creates an environment that promotes densification and improved material properties. This results in enhanced mechanical strength, reduced porosity, and increased wear resistance in your final products.

The furnace features an intuitive control interface, allowing you to finely adjust the temperature, pressure, and other key parameters. This level of control ensures consistency and reproducibility across batches, guaranteeing the utmost quality in your end products. Whether you're working with ceramics, metals, or composite materials, this furnace is designed to meet the stringent demands of modern manufacturing.

Safety is paramount, and our 10MPa Gas Pressure Sintering Furnace is equipped with state-of-the-art safety features, including advanced pressure relief systems and temperature controls. This ensures not only exceptional performance but also peace of mind for operators.

Specifications

10MPa Gas Pressure Sintering Furnace
Type	3312-10	4412-10	5518-10
Dimension of usable space	300×300×1200mm	400×400×1200mm	500×500×1800mm
Max. loading weight	500KG	600KG	1500KG
Heating power/ Total power	370KW/410KW	370KW/410KW	550KW/590 KW
Max. designing pressure	10MPa
Max. working pressure	9.50MPa
Max. designing temperature	1600℃
Max. working temperature	1550℃
Temperature control	3 zones
High temperature uniformity	≤±5℃
Max. heating up speed (without loading)	15℃/min（≤1000℃）；10℃/min（1000-1520℃）
Max. Vacuum	≤ 2Pa（2.0×10-2 torr）, tested in cold and clean chamber
Leak rate	≤ 2Pa/h, tested in cold and clean chamber
Wax collecting rate	≥98﹪（Paraffin as the binder）
Cooling（with loading）(Inlet cooling water ≤30℃, chamber pressure 50bar)	From 1450 ℃ to 100℃, 5~7h	From 1450 ℃ to 100℃, 6~8h	From 1450 ℃ to 100℃, 8~10h

Application

10MPa Gas Pressure Sintering Furnace – Tailored for Diverse

1. Oxide Ceramics:

Elevate your oxide ceramics production with our 10MPa Gas Pressure Sintering Furnace. Achieve exceptional density and structural integrity in materials like alumina, zirconia, and spinel. Benefit from reduced porosity, improved mechanical properties, and extended lifespan. Whether for electronics, aerospace, or medical applications, our furnace empowers you to create oxide ceramics of uncompromising quality.

2. Transparent Ceramics:

Innovate in the realm of transparent ceramics using our advanced sintering furnace. Whether it's sapphire, yttrium aluminum garnet (YAG), or cubic zirconia, our furnace's precise pressure and temperature control facilitate the production of transparent ceramics with exceptional clarity and strength. Explore new frontiers in optics, laser technology, and specialized windows with our cutting-edge solution.

3. Silicon Nitride:

Harness the power of our 10MPa Gas Pressure Sintering Furnace to excel in silicon nitride manufacturing. Achieve remarkable toughness, thermal resistance, and wear performance in applications ranging from cutting tools to automotive components. With precise sintering parameters, our furnace ensures consistent results, allowing you to meet the demands of high-performance industries with confidence.

4. Cemented Carbide:

Revolutionize your cemented carbide production using our state-of-the-art sintering furnace. Attain exceptional hardness, toughness, and wear resistance in cutting inserts, mining tools, and precision components. The controlled environment of our furnace enhances the carbide grain structure, leading to outstanding tool performance and prolonged tool life, giving you a competitive edge in the market.

Diversify your capabilities and achieve excellence across multiple applications with the 10MPa Gas Pressure Sintering Furnace. Tailored to the specific requirements of oxide ceramics, transparent ceramics, silicon nitride, and cemented carbide, our furnace empowers you to push boundaries, innovate, and deliver products of unmatched quality and performance.